Saturday, May 2, 2015

What You Need to Know to Keep Your Car in Good Condition?

Maintenance and care are the two keywords that help you in keeping your car in a good condition. There are a few things that you should know about car maintenance and servicing to make sure that you get a smooth drive. Disciplining a maintenance schedule is crucial. You simply have to stick to the schedule. There is nothing that is more important than regular servicing of your car to keep it in good condition. The preventive maintenance schedule is quite crucial. You have to comply with this schedule. In this maintenance cycle, brakes, tires, suspension and the electrical connections may be checked regularly. While doing these checks, it is possible that you can get an early warning on issues that may trouble you later. As a car owner, you should be conversant with a little of the basic car maintenance checks. You cannot leave it all to the garage mechanic. A much overlooked requirement is the regular rotation of the car tires. You have to rotate each tire to a different corner each time. The tires also have arrows on their sidewalls to denote their orientation for direction. The car tires have to be inflated correctly with the air pressure as suggested by the producers. This has an impact on the handling of the car at corners and over speed breakers and bumps. It is a good safety feature. Air pressure that is not correct can be risky and may lead to an accident. It also negatively affects the comfort level of the car ride and reduces the life of the tires besides worsening the fuel economy. The tire pressure can vary with seasons. The air that is inside the tires can expand when the temperature rises. It is important to check the air pressure in the car tires regularly. When you buy a car, you expect it to give you service as long as possible. In the initial stages of the break-in period, you have to be patient, particularly for the first thousand miles. You have to keep your speed under fifty five miles per hour. You have to be careful to avoid straining the drive train with a heavy load. Do not tow trailers or place heavy material in the boot. A new car should not idle for long duration. The oil pressure can then send oil to all parts of the engine. The acceleration has to be on the lighter side so that the engine is not rotating above 3000 rpm for the initial driving time. When you drive your car after the break-in period, do not race the engine during the start up. This will wear down your engine faster. You have to accelerate gradually as you begin to drive. The major wearing down of the drive train happens in the first twenty minutes of the running. When you are at the traffic lights, you can shift to the neutral gear to put fewer burdens on the engine and the automatic transmission. When it is extremely hot or cold outside, you have to avoid driving at high speeds. Basic knowledge of your car will go a long way in preserving your vehicle but not many owners are mindful of servicing their cars regularly these days.

No comments:

Post a Comment